A UK manufacturer of pressure and temperature measurement equipment looking to upscale on-site operations contacted Fercell to explore their options for a new local exhaust ventilation system for fume extraction.
With welding and soldering processes carried out within the workshop, it was imperative that local exhaust ventilation equipment be put in place. The solution needed to be flexible, capturing any fume at the source, protecting both workers and anyone nearby, and ultimately being compliant with COSHH regulations.
Exposure to welding and soldering fumes without adequate ventilation in place can have detrimental effects on workers’ health, and the law requires you to have the correct protective LEV system measures in place. The LEV measures required are dependent on various factors, such as the frequency, location, and type of activities being undertaken, which in this case required a comprehensive, flexible solution for both welding and soldering activity carried out in multiple areas across the workshop.
Fume Extraction Solution
The solution consists of multiple FLEXI series extraction arms with an auto start-stop and pressure-controlled inverter, which are connected to a close-coupled network of ducting with an MEF 400 fan located in a soundbox enclosure, and a high-flux discharge cowl.
Placement of multiple FLEXI series extraction arms provides a versatile solution for the capture of fume, with three friction joints and 360° rotary suspension on each extraction arm allowing for flexible positioning of the equipment to meet each user’s requirements.
The FLEXI extraction arms use ALU hoods but are also compatible with various other hood types, should any changes be required in the future.



Equipped with backward blade impellers, the centrifugal MEF 400 fan delivers optimal efficiency, which is especially suitable where mixed airflows using variable speed control are required.
Placement of the MEF fan within a sound box acoustic enclosure minimises noise levels by up to 15 dB(A), making it suitable for installation within close proximity of working areas. Cooling holes in the bottom of the enclosure ensure air is kept cool.
Following filtration, air is exhausted via close-coupled ducting terminating with a high-flux discharge cowl.
Installation of the fume extraction system efficiently removes polluted air from the workshop, allowing for welding and soldering processes to be carried out safely and efficiently.
For more information on industrial ventilation solutions for dust and fume extraction, contact us here.