FAQs

Click on the buttons to see the results change below

About

WSM Granulator Series

The WSM Series of granulators are suitable for processing of a wide range of plastics, producing high quality granulate, including blow-moulded materials such as PET bottles, PE/PP bottles, canisters and buckets.  In addition the WSM series can be specified to shred resistant materials like thick wall pipes. Either as a stand-alone solution or as stage of a two part process (downstream of a primary shredder) the WSM is a straightforward and economical size reduction solution. The various sizes and different versions make it possible to match the WSM to your specific material and throughput requirements....

Read More...

Read more
U Granulator Series

The U Series, also known as UNICREX, has been designed specifically for the granulation of aggressive materials, such as rubber, plastic and metalics (including electronic waste)....

Read More...

Read more
LM Granulator Series

The compact LM granulator series are typically specified for the size reduction of voluminous, thin walled material applications including loose film (in-line edge trims), hollow containers, crates, PVC pipe (thin wall PE/PP), profiles, automatic bumpers, injection moulding and thermoforming scrap....

Read More...

Read more
LP – SR Granulator Series

The SR/LP series have been designed for size reduction of full length, up to 6.0m long, profiles and pipes, without the need to pre-cut material into shorter pieces. Generally LP versions will be used for PVC profiles, with the specially designed rotor grabbing and pulling material into the cutting chamber, while the SR version are better suited for the most demanding applications such as extremely thick-wall PVC, PP and PE pipes to achieve optimum throughput, through an enclosed hopper to ensure safe and reliable size reduction....

Read More...

Read more
SM Granulator Series

The SM Series of granulators should be considered an all-round granulator.  Designed for general size reduction applications for such materials as start-up lumps, massive purgings, large profiles, voluminous hollow parts and general, thick-walled, plastic scrap. The SM Series rotor and stator knives are arranged counter angle to each other to produce a true scissor cutting action. The result is a cleaner, more uniform granulate with minimal heat build-up and minimal energy consumption and sound output....

Read More...

Read more
SX Granulator Series

The SX granulator series are designed for extreme high throughput applications including film, banding (tangled), tape (bundled), PP big bags, crates, hollow containers and BOPP/BOPET/PP on-line and off-line film extrusions. The SX Series can achieve up to 15 tonnes throughput per hour when utilising an 800mmø x 2,000mm wide rotor drive by a 315 kW drive train (dependent upon screen size)....

Read More...

Read more
ZM Series Pulverisers

The ZM pulverisers are designed for the processing of medium to hard density materials, along with brittle and high impact plastics (PE, PVC and PC) that require final processing into powder form. Input material must be granulated with a maximum particle size of 6-8 mm (1/4-5/16 in.)....

Read More...

Read more